How to Install Refurbished Wyze Deadbolt Smart Lock Quickly
If you're looking to upgrade your home security with a smart lock that is easy to install and packed with modern features, the
Wyze Lock Bolt - Bluetooth Deadbolt Add-On is an excellent choice. This refurbished smart lock replaces your existing deadbolt and offers ultra-fast fingerprint access, a backlit keypad, and seamless app control — all designed for quick installation and effortless use.
Why Choose Wyze Lock Bolt?
The Wyze Lock Bolt is a Bluetooth-enabled smart deadbolt replacement that combines convenience, security, and smart home integration. Here’s why it stands out:
- Ultra-Fast Fingerprint Sensor: Unlock your door in less than a second with a simple touch.
- Backlit Keypad with Anti-Peep: Enter your access code securely, even if someone is watching.
- Auto-Lock Function: Never worry about forgetting to lock your door again.
- Built-in Alarm: Detects jams and alerts you immediately.
- Emergency One-Time Codes: Generate temporary access codes remotely for guests or service providers.
- Weatherproof & Pick-Proof: Rated IPX5 to withstand weather and designed without a traditional keyhole for enhanced security.
- Long Battery Life: Powered by 4 AA batteries lasting 10-12 months, with emergency USB-C charging if batteries run low.
Quick Installation Guide for Wyze Lock Bolt
Installing your refurbished Wyze Lock Bolt is straightforward and can be completed in about 20 minutes with common household tools. Follow these simple steps to get started:
Step 1: Prepare Your Door
- Remove your existing deadbolt’s thumb latch using a Philips screwdriver.
- Remove any additional backplates if present.
- Ensure your door thickness is between 1-3/8” and 1-3/4” and the backset is either 2-3/8” or 2-3/4” (standard US door sizes).
Step 2: Mount the Lock
- Use the included mounting plate and screws to attach the Wyze Lock Bolt in place of the old thumb latch.
- Make sure the plate is level but avoid over-tightening screws to prevent damage.
- Select and install the correct adapter for your deadbolt tailpiece (refer to the Wyze app compatibility guide).
Step 3: Attach the Lock Bolt
- Place the Wyze Lock Bolt on the mounting plate, aligning the knob with the adapter.
- Check that the lock is flush with the door and the thumb latch turns smoothly.
- If the latch is stiff, remove and rotate it 90 degrees, then try again.
- Tighten the screws inside the battery compartment securely but not excessively.
Step 4: Insert Batteries and Power On
- Install the 4 AA batteries included, observing correct orientation.
- Close the battery compartment latches.
- The lock will power on and be ready for setup.
Step 5: Set Up in the Wyze App
- Enable Bluetooth and location permissions on your smartphone.
- Open the Wyze app and add the Wyze Lock Bolt device.
- Follow the prompts to pair the lock, create your access code, and optionally set up fingerprint unlocking.
- Test locking and unlocking via the keypad, fingerprint sensor, and app.
Pro Tip: If you encounter any issues during installation, such as the keypad being unresponsive or the lock jamming, consult the Wyze troubleshooting guides or perform a factory reset by deleting the device in the app and re-pairing.
Alt text: Person installing Wyze Lock Bolt smart deadbolt on front door
Features That Make Wyze Lock Bolt a Smart Upgrade
Ultra-Fast Fingerprint Unlock
Set up your fingerprint in the Wyze app once, and unlock your door instantly with a touch. This feature eliminates fumbling for keys or codes, making entry seamless.
Backlit Keypad with Anti-Peep Technology
Enter your access code securely even if someone is watching. Anti-Peep allows you to add extra digits before or after your code without affecting unlocking.
Auto-Lock and Security Alerts
The lock automatically secures your door after a customizable delay once closed. It also alerts you to any jammed lock conditions or multiple failed code attempts, keeping your home safe.
Emergency Access and Battery Backup
If your batteries run low, the lock flashes a red indicator. You can use the emergency USB-C charging port for a quick power boost to enter your access code. Additionally, generate one-time codes remotely for temporary access without sharing permanent codes.
Alt text: Close-up of Wyze Lock Bolt fingerprint reader on door
Compatibility and Considerations
Wyze Lock Bolt is designed to fit most standard US doors and deadbolts. It supports door thicknesses from 1-3/8” to 1-3/4” and backsets of 2-3/8” or 2-3/4”. However, it is not recommended for:
- Mortise or integrated lock and handle systems
- Rim cylinder locks without modification
- Dutch doors (split top and bottom opening)
- Doors outside standard US dimensions without drilling or chiseling
If your door or deadbolt is non-standard, additional tools or modifications may be necessary.
Final Thoughts
Installing a refurbished Wyze Lock Bolt smart deadbolt is a quick and rewarding upgrade to your home security. With its easy 20-minute installation, advanced fingerprint and keypad access, and smart app controls, you can enjoy keyless convenience and peace of mind.
For best results, follow the installation steps carefully, use the Wyze app for setup and management, and keep your lock’s firmware updated. Should you need assistance, Wyze offers comprehensive support and a helpful user community.
What is the Wyze Lock Bolt and what features does it offer?
The Wyze Lock Bolt is a Bluetooth-enabled smart deadbolt replacement designed for easy installation and enhanced home security. Key features include ultra-fast fingerprint unlocking, a backlit keypad with anti-peep technology, auto-lock functionality, built-in alarm for jams, emergency one-time codes, weatherproof and pick-proof design, and long battery life with emergency USB-C charging.How do I install a refurbished Wyze Lock Bolt smart deadbolt?
To install a refurbished Wyze Lock Bolt, remove your existing deadbolt, attach the included mounting plate, select the correct adapter for your deadbolt tailpiece, mount the lock, insert 4 AA batteries, and set up the device in the Wyze app. The process takes about 20 minutes and requires only common household tools.What door types are compatible with the Wyze Lock Bolt?
The Wyze Lock Bolt is compatible with most standard US doors with thicknesses between 1-3/8” and 1-3/4” and backsets of 2-3/8” or 2-3/4”. It is not recommended for mortise or integrated lock and handle systems, rim cylinder locks without modification, Dutch doors, or doors outside standard US dimensions without additional work.How does the fingerprint unlock feature work on the Wyze Lock Bolt?
The Wyze Lock Bolt’s ultra-fast fingerprint sensor allows you to unlock your door in less than a second. You can set up your fingerprint in the Wyze app, enabling instant and secure keyless entry with just a touch.What is anti-peep technology on the Wyze Lock Bolt keypad?
Anti-peep technology allows you to enter extra digits before or after your actual access code on the backlit keypad. This prevents others from guessing your code, even if they are watching you enter it.What should I do if my Wyze Lock Bolt is unresponsive or jams during installation?
If the keypad is unresponsive or the lock jams, consult the Wyze troubleshooting guides or perform a factory reset by deleting the device in the Wyze app and re-pairing it. Ensure all installation steps are followed correctly and the lock is properly aligned.How long do the Wyze Lock Bolt batteries last and what happens if they run low?
The Wyze Lock Bolt is powered by 4 AA batteries that typically last 10-12 months. If the batteries run low, a red indicator will flash. You can use the emergency USB-C charging port to temporarily power the lock and enter your access code.Can I generate temporary access codes for guests with the Wyze Lock Bolt?
Yes, the Wyze Lock Bolt allows you to generate emergency one-time codes remotely through the Wyze app. This feature is ideal for granting temporary access to guests or service providers without sharing your permanent code.Is the Wyze Lock Bolt weatherproof and secure against picking?
Yes, the Wyze Lock Bolt is rated IPX5 for weather resistance and is designed without a traditional keyhole, making it pick-proof and suitable for outdoor use.How do I set up the Wyze Lock Bolt in the Wyze app?
After installing the lock and inserting the batteries, enable Bluetooth and location permissions on your smartphone. Open the Wyze app, add the Wyze Lock Bolt device, and follow the prompts to pair the lock, create your access code, and set up fingerprint unlocking.